12/30/2023 0 Comments Satisfactory rotorThese resources will go on to produce 40 steel rotors per minute.įirst we will need three foundries, two will be set to 100% clockspeed as well as a third foundry set to 66.7% clockspeed. The next layout is for Steel Rotors, for this we will need 120 coal per minute, along with 120 iron ore and 120 copper ore. Next send the 180 copper ore to six smelters, these will send the 180 copper ingots along to a manifold of 9 constructors producing copper sheets at 100% clockspeed before being sent on to the 4 assemblers, which will now be producing 45 copper rotors per minute. These will be sent on to be steel beams in a single constructor before being fed into three more constructors producing steel screws each at 100% clockspeed, these can be merged together if using a mk5 belt and will be sent on to the four assemblers set to copper rotors with each running at 100% clockspeed. This particular layout requires layout only requires 60 coal, 60 iron ore and 180 copper ore, and produces 45 rotors per minute.įirst place a foundry and overclock it to 133.33% clockspeed (alternatively place 2 foundries and set each to 66.66% clockspeed) This will take the iron and the coal and turn it into 60 steel ingots per minute. The next layout is for Copper Rotors, in this layout we will be using the Steel Screw alternate recipe as well as overclocking a single foundry. The 40 iron rods that are left over from the first set of constructors should be sent to the two assemblers and split evenly between the two, these assemblers will be set to rotors, producing 8 rotors per minute at 100% clockspeed.ĭo not that the screw lines will need to be mk2 as 100 items will be travelling along each of the lines. In the photos attached the mergers are connected to an elevator which transports the screws beneath the build and across to the assemblers. Next, run the 50 iron rods line to five constructors, these should each be set to screws and merged into two equal lines and sent on to two assemblers. To do this place a splitter infront of the third constructor and run two outputs to the left side leading to the first two constructors merging line, and then the third splitter output should merge with the merging line of the three constructors to the left of it. Each of these smelters should then split their ingots between two constructors and all 6 of these constructors should be set to iron rods.Īt this point we need to split the 90 iron rods between two lines, one holding 40 iron rods, the second holding 50. The vanilla recipe, requires 90 Iron ore per minute and produces 8 Stators per minute.įirst place three smelters at the start of your build producing iron ingots each at 100% efficiency. Note that in order to use these layouts you will have to have the necessary alternate recipes as named in the title of each layout, as well as any further recipe mentioned in the guide. This particular guide, will show the layouts, with a brief commentary on the build. These layouts are all correct as of Update 6.Įfficient Alternate Rotor & Stator Recipes Satisfactory Update 6. Today we're going to be breaking down the three different rotor recipe layouts and both stator recipe layouts in satisfactory, I recommend watching my video guide covering the builds whilst reading through the layouts here, for extra information. This guide will break down all rotor and stator alternate recipe layouts from our satisfactory efficient alternate layouts video, giving you a clear layout to follow for your own factories. Efficient Layouts: All Rotor & Stator Recipes
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |